Plaslite Hydro is a superior quality paint, based on the last generation of pliolite resins – Hydro-pliolite – ELIOKEM Trade Mark. Those resins use the technology E.B.S (Emulsified Binding System) becoming more porous and durable. It also provides other important characteristics such as permeability to water steam and impermeability to liquid water, high resistance to alkalinity and low smell, making it more ecological. It may be applied over cement mortars, stucco, concrete or other type of materials used in construction, mainly in exteriors, providing it an extra matte finishing. Plaslite Hydro paint was submitted to rigorous tests at ELIOKEM’s laboratories, having, not only been approved to the market, but having also received the authorization to the exclusive logo of the brand.
In order to make easier the painting, and to economize in labour, “PREMIUM MATE” was put on the market. It is a high quality paint, which can be used, preferably in interiors, allowing a total coverage in two coats’ maximum. In some cases, one coat of paint is enough to achieve a good matte finish. It has a good resistance to abrasion, rubbing, and to wash, and it may also be applied in exteriors. As it has a fast drying time, it allows applying two coats in a single day.
“FUNGIPLÁS” paint appears to prevent and to solve several problems, mainly when there are fungus, algae and humidity stains. It is applied, mainly in bathrooms and kitchens, in which the environment is subject to high humidity levels, but also in exterior walls where there is such a high humidity level that allows the emergence of those funguses and stains. Before applying “FUNGIPLÁS”, the surfaces must be previously cleaned using water and bleach, then cleaning using only water, and at last, applying the anti-fungus solution “FUNGILIMPA”. It must be left acting for, at least 24 hours. After that, the surface can be painted using the “FUNGIPLÁS” paint.